I did it again!
Two years ago I got my first two sets of wild gears and I had so much fun with it. Now, 2 years later I discovered there are new additions, so I made myself a big gift and ordered 3 more sets.
Again it was so special to unpack them.
This time I did not remove the brown protection paper, that I could clearly see which were my first sets and which are the new parts.
After some playing and trying I made a big ornament, that could be used as a t-shirt design.
What a fun to combine 3 very different techniques:
- drawing with the spirograph
- scanning and cutting with the ScanNCut
- and ironing-on my own drawing on fabric
For the spirograph drawing I used a thick black Stabilo pen (68-series).
The contrasts and image quality were good enough for the built in scanner of the Brother ScanNCut to get all the lines and edges.
I scanned it and saved the data in the machine.
Then I chose gold metallic htv in full size, 12 x 12 in for cutting and after the result was great I just cut another one in copper.
Weeding was a job while watching TV. It took a while…
Lucky who got a heat press. 15 seconds pressing each and my new t-shirts were ready to wear.
Have a great weekend,
Now that I know a little bit more of how the wild gears are functioning I was on search for other pens.
Some of the gears got quite big holes. I have the whole palette of Stabilo 88 which make a 0.4 mm line. But why not combine two different thicknesses. I got some Stabilo 68 pens. They draw a 1 mm line. It is great that both thicknesses got exactly the same colors. And I found some 1 mm gel pens by Faber Castell which are great for dark papers, too.
I grabbed some gelli prints I found boring and here we go turning the wheel…
I used the thick pen in the big hole, then added the little ring and draw a thin line. This gives the cool parallel lines.
With the blue one I was just too excited about the metallic gel pen, that I slipped a couple of times. This is covered with some pretty spirals and done.
The beautiful regular lines are giving a nice contrast to the blurry printed papers made with embossed ornaments.
These are still trials, but I have the feeling I get more control over the gears with time.
Now the papers got an exciting addition, but I still don’t know how to use them 🙂
Maybe it’s just me, but I find it smells a tiny little bit like spring already.
At least I felt for doodling flowers yesterday on my Wacom into my Mac and then again out of the Mac on paper with my Cameo cutting machine.
I could have done this directly with pen on paper. Ok, but having them as a file I can have them drawn over and over again on different paper with different colors and versions.
I cut a matching stencil for easy application of more color. This is quickly done with Rangers Mini Ink Blending Tool and Distressed Ink pads.
Then I did a test run on a striped misprint, added some hand drawing on the flowers and wow… now I like the page so much, that I don’t want to cut it in pieces for tags or cards anymore.
But how handy, I just can make more of them and the machine already started her well known singing sounds while moving the pen ….
It was my christmas wish and they are only to be ordered in USA from the designer himself.
We ordered them early, but the fantastic german post had my package forgotten in a corner for more than 3 weeks in Frankfurt.
Thanks to the USPS tracking system you can see every move of your package, but it can also make you completely crazy when there is NO movement, especially when you are lying there suffering from a heavy flu during and after the holidays…sigh.
Then weeks later somebody must have found it and put it into the right direction, so at last I could get the package from the local tax office paying 2.7 % tax, the huge amount of Euro 4,32…what a stupid effort to collect such a little amount, but well…
Anyway unpacking was such fun, to peel off the brown cover and get the thick clear acrylic gears.
Those who read more here might know what it is.
I am a big fan of the old spirograph drawing set from my childhood.
This is a grown up set designed by Aaron Bleackley, it is called Wild Gears and was a successful kickstarter project.
My love was generous enough to buy 2 big sets for me and after playing some days I LOVE them.
At the bottom you can see my first experiments with non-symmetrical shapes. These are a challenge and I love challenges.
Have fun to see me unpack and try them!
More will follow.
2 days ago I received my spare parts Super Spirograph found on ebay USA and thanks to the seller, who delivered internationally. When I opened it there was a big WOW! It was packed in spirographic doodles paper! I LOVE the lid with the wheel chart inside. This is not what mine has which was produced in France once. They are not 100 % compatible, but almost, so with some extra tape and care it works to combine the parts.
The reason I bought it was mainly because there were also those shaped wheels added I didn’t have with my old Spirograph.
I couldn’t stop doodling anymore so the pics are not the best made in the middle of the night.
Here are some examples made with the eye wheel (my favorite) and with the triangle wheel. Scaled very small they are looking like snow flakes.
And my damaged Stabilo 88s are still good for drawing fillings. I have reordered these colors meanwhile and with less pressure they are working fantastic.
Have a great artsy weekend!
Just wanted to share 2 drawings I’ve made with my old Super Spirograph tonight.
I am still too impatient and too quick. I damaged directly some tips of my new pens with too much pressure.
And I slipped several times. To cover this I doodled around a bit and wow there came something new out what I really like.
While I went into vacation mode during August (urgently needed) I tried to stay away from the computer. But those who know me also know I just can’t stop fiddling and playing. So I took the time to find my old spirograph set from the attic.
I stumbled over it through Inkscape, which has a spirograph function and I just didn’t understand what it does and how it works.
So now I searched for the box with numerous plastic rings and wheels and I remembered how it worked very quickly even if it was ages ago.
Two parts are missing, but I am glad it’s only two you don’t necessarily need and it still works well.
Until the new colored ball point pens arrived I did a lot of tests with all the wheels with simple blue pens.
It was hard to find beautiful pens, but I got 2 different types from Staedtler with different line thicknesses. They have to dry fast, because the wheels cross the lines over and over again while drawing.
Impatient me often slipped from turning too quick, ruining the whole drawing, so this is really something to do accurate and slow.
After all it was a lot of fun. Lets see what I can do with all the lovely circles and shapes I made. I already scanned them for further use.
And now I understand the digital version, too, yeah! It is all about mathematics 🙂
Anyway I find the real drawings very charming with the dots and spots and irregular lines.
If you want to learn more about spirograph I found some great infos here:
Have fun and if you stumble over one of those sets by chance, try it !